Home  >  News

News

You should know 5 Tips on you use your vacuum pump filters

1. When cleaning the vacuum pump filter element, appropriate cleaning air pressure and cleaning method should be adopted, and the cleaning times of the filter element should be strictly controlled and recorded. Generally speaking, the original vacuum pump filter element will have a special number plate on the inner filter, and the outer After each cleaning of the filter element, the corresponding number is torn off to facilitate the control of cleaning times.

2. In construction sites, mines, deserts and other places with high dust concentration, it is recommended to install an air pre-filter in the air intake system. On weekdays, clean the dust collecting tray and the dust exhaust duckbill in time, which can greatly reduce the amount of dust entering the vacuum pump filter element. dust and prolong the service life of the filter element.

3. The new filter element should also be carefully checked before installation to prevent damage to the filter element during handling. At the same time, the quality of the vacuum pump filter element should be ensured. It is best to replace the regular vacuum pump filter element, and do not arbitrarily use substitutes.

4. Every time you clean the main filter element, you should pay attention to check the condition of the safety filter element. If the safety filter element is found to be dusty, be sure to find out the reason. If it is confirmed that the main filter element has lost its function, it should be completed immediately regardless of whether the specified number of cleanings has been reached. replace.

5. Avoid the vacuum pump filter element contacting oil items, and avoid oil stains contaminating and blocking the filter element. At the same time, it is necessary to discharge the accumulated water and oil at the bottom of the air compressor used to clean the vacuum pump filter element in time. It is recommended to install an air dryer at the air outlet to separate the oil and water in the air and avoid polluting the filter element during cleaning.

Since the specifications for the use of vacuum pump filter elements are often not very specific, it is inevitable that there will be some misunderstandings in the concept and actual operation, which will affect the efficiency of the entire mechanical equipment. Therefore, the equipment staff must pay attention to its inspection and maintenance in peacetime, and keep in mind the matters needing attention in the use of the vacuum pump filter element introduced above.

CATEGORIES

CONTACT US

Contact: Sunny

Phone: 18790023620

Tel: +86 18790023620

Email: info@filterreplace.com

Whatsapp:+86-18790023620

Add: Tiantan Road,Huling Industrial Zones,Jiyuan ,Henan ,China

Scan the qr codeClose
the qr code